FoxWizard MIDI Multitool Firmware

Version 2.1

🔗 Download FoxWizard Firmware

How to update the firmware manually:*

*NOTE: Normally the FoxWizard Patchling online programming tool will also update the firmware automatically, with none of these steps needed. But, this can help you recover a unit in distress.

1. Unplug the device from USB.
2. Open the case by sticking a guitar pick between the edges of the case halves on the long sides.
3. Short the two FIRMWARE pads together on the bottom left. Use tweezers or a paperclip.
4. While still shorted, plug the device into a computer via USB-C.
5. A drive named RPI-RP2 appears.
6. Remove the short from the FIRMWARE pads.
7. Drag the downloaded firmware file onto the RPI-RP2 drive.
8. The device reboots automatically once the copy finishes.