Arduinoboy Host Edition Firmware

Version 1.3.6

🔗 Download Arduinoboy Host Edition Firmware

How to update the firmware:

1. Unplug the device from USB.
2. Open the case by placing something thin between the edges of the case halves on the long sides.
3. Short the two FIRMWARE pads together on the bottom left. Use tweezers or a paperclip.
4. While still shorted, plug the device into a computer via USB-C.
5. A drive named RPI-RP2 appears.
6. Remove the short from the FIRMWARE pads.
7. Drag Arduinoboy.ino.uf2 onto the RPI-RP2 drive.
8. The device reboots automatically once the copy finishes.